6111Aluminum plate
Thickness:0.7-1.5mm
State:T43、T61
Quantificationally:3000kg
Typical application:Automobile panels, panels, etc
Sales phone:
023-65802068Product introduction
6111 aluminum alloy cover material is one of the important products to promote the light weight, energy saving and emission reduction of automobile. The product has obvious weight reduction benefit, considerable energy saving effect, reducing air pollution and improving the environmental quality. It is helpful to improve the stability of vehicle driving, the comfort and safety of passengers.
Technical parameter
典型合金 | 6111铝板 |
材料状态 | T43、T61 |
厚度(mm) | 0.7-1.5 |
宽度(mm) | 800-2400 |
长度(mm) | 1000-5500 |
典型产品 | 汽车覆盖件、壁板等 |
The packing method of aluminum plate:
1. Foil or laminating the aluminum sheet to ensure that the surface of the aluminum sheet is intact without scratching.
2, the plastic or kraft paper package is used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during the transportation process (each package has moistureproof desiccant to ensure the quality of our products in East China and Southern China).
3, add wooden support and steel belt reinforcement to avoid collision in transportation process and ensure aluminum plate geometry unchanged.
4. Export products are packed in wooden boxes and brackets with fumigation marks.
5, packaging according to other packaging requirements of customers.
The packing method of the strip:
1. When the width of the strip is not larger than 500mm and the coil diameter is not greater than 500mm, after wrapping 1~2 layers of kraft paper outside, it will be packed with adhesive label.
2, when the width of the strip is not more than 500mm and the roll diameter is more than 500mm, the outer layer is wrapped with bamboo sheet, fiber board or cardboard after wrapping 1~2 layers of kraft paper and a layer of plastic cloth, and the vertical or horizontal tray is packaged in series, and the vertical (or lying) tray is used.
3, when the width of the strip is greater than 500mm and the roll diameter is more than 500mm, the 1~2 layers of kraft paper and a layer of plastic cloth are wrapped, and the outer layer is packed with a bamboo mat, or the fiberboard is wrapped by a vertical or horizontal tray frame.
Product application
Automobile body cover is the auto parts of aluminum alloy products covering the car body through deep blanking. The typical uses include the inside and outside plate of the engine cover, the inside and outside plate of the door, the inside and outside board of the trunk cover, the inside and outside board of the roof, the wing plate and so on.
Tel:023-65802068
023-65802326
Mailbox:sales@cqswa.cn
QQ: 1045712113