Aluminum alloy profiles for motor housing
Alloy:6063、6063A
State:T5、T6
Quantificationally:1000kg
Technical standard:YS/T780-2011
Sales phone:
023-65802068Product introduction
The magnesium content of the housing profiles for explosion-proof motors should not be greater than 0.5%, and the chemical composition of other housing profiles should meet the GB/T3190-2008 standard. The size deviation of hole wall thickness and wall thickness of the ordinary foot shell sections should be consistent with GB/T14846-2008 high grade regulations. The inner hole wall thickness and the bottom wall hole free cutting shell thickness profile dimensions shall meet the requirements of product size schematic.
Technical parameter
产品类别、表面形式、牌号、状态、用途
产 品 类 别 | 牌 号 | 状 态 | 表 面 形 式 | 用 途 |
普通机壳型材、 内孔免切削机壳型材 | 6063、6063A | T5、T6 | 挤压表面、 阳极氧化处理的表面 | 非防爆电机 |
6063 | 防爆电机 |
产品尺寸示意图
机座号/凸缘号 | 内孔直径(D) | 内孔壁厚(t) | 底脚壁厚(T) | ||
最小壁厚 | 尺寸偏差 | 最小壁厚 | 尺寸偏差 | ||
50 | 80 | 1.5 | +0.3 -0.1 | 2.8 | +0.3 -0.1 |
56 | 90 | 1.8 | +0.3 -0.1 | 3.0 | +0.3 -0.1 |
63 | 96 | 2.0 | +0.3 -0.1 | 3.5 | +0.3 -0.1 |
71 | 110 | 2.2 | +0.35 -0.1 | 4.0 | +0.4 -0.1 |
80 | 128 | 2.5 | +0.35 -0.1 | 4.5 | +0.4 -0.1 |
90 | 145 | 2.8 | +0.4 -0.1 | 5.0 | +0.5 -0.1 |
100 | 155 | 3.0 | +0.4 -0.1 | 5.5 | +0.5 -0.1 |
112 | 175 | 3.2 | +0.4 -0.1 | 6.0 | +0.5 -0.1 |
Introduction of equipment
It has 8000 tons of hydraulic press, 12500 tons horizontal extruder, 1500 ton stretcher, high-speed belt saw, quenching furnace, aging furnace and finishing equipment, with an annual production capacity of 12000 tons.
Tel:023-65802068
023-65802326
Mailbox:sales@cqswa.cn
QQ: 1045712113